Solvent-based primers by extruder machine

Sections of frames painted with primers applied by extruder
Section of a frame painted with solvent-based extruder primer for frames
Section of a frame colored with solvent-based extruder primer

In the frame industry, extruder machine application is a widely used technique that allows for effective filling of the wood pores.

With over 35 years of experience in the frame industry, we offer our complete range of solvent-based primers for extruder application.
The product FPT 177 is a transparent two-component primer on a polyurethane base. It is highly valued for its excellent coverage.
CATALYSIS:
in a ratio 100: 10 weight with C 303
OVERCOATING:
after 1 hour with itself or after 12 hours with nitro-based or PU-based varnishes
The product ONT 433. is a very versatile one-component transparent varnish on nitrocellulose base that can be used both as a primer and a topcoat. It guarantees a pleasant velvet appearance.
OVERCOATING:
after 1 hour with itself or after 12 hours with nitro-based varnishes
FPT 245. line consists of two-component, polyurethane-based fillers available in several colours. They are made using finely ground pastes that allow to obtain an extremely thin base that is appreciated for the low absorption of finishing coats.
CATALYSIS:
in a ratio 100: 10 weight with C 303
OVERCOATING:
with itself after 1 hour or after 10 hours with PU-based products
AVAILABLE COLOURS :
SN 12. line consists of one-component nitrocellulose-based fillers available in several colours. They are valued for their fullness and quick drying time.
OVERCOATING:
with itself after 1 hour or after 5 hours with nitro-based paints
AVAILABLE COLOURS :

Back to products

Choose us for

your

coating

Adding a dye during the production process of a copper-colored paint

Enter the world of Eureka Colour

Discover our wide range of professional and sustainable coatings. Contact us now to discover the world of Eureka Colour. We bring new shades to the life of your wood.